ASIGA MAX UV

for dental technicians and dentists

3D printer №1

Our clients
DRUZ is your FRIEND in solving 3D issues
Accuracy
The most accurate printing among similar 3D printers
Versatility
≈ 400
The largest number of
available polymers
kinds
Convenience of work
2 clicks
Intuitive interface, ready-made settings for printing
Starting and setting up printing takes place in
Speed
2.5 times
faster than other printers
Save time
with
predictable
result
SPS™ - Intelligent Positioning System Technology
Guarantees accurate formation of each layer in any working environment
Material change
Fastest material change — less than 30 seconds
How MVision and KAZO Clinic use ASIGA
Получить консультацию
В течении 10 минут, с вами свяжется менеджер и даст квалифицированный ответ на все вопросы касательно 3D - принтера
Get
a consultation
Manager will contact you and give a qualified answer to all questions regarding the 3D printer within 10 minutes
PECULIARITIES
IN WORK WITH DRUZ
Installation
We connect, set up, teach how to use the printer in our office or in your dental clinic / dental laboratory.
Technical support
We help in case of problems while using a 3D printer.
Own warehouse
Constant availability of printers and consumables for your smooth work.
Official representative
We are the official representatives of ASIGA in Ukraine.
DRUZ is your FRIEND in solving 3D issues
FREQUENTLY ASKED QUESTIONS
What's the specification? [01]
What makes Asiga the most accurate printer? [02]
THANKS TO THE SENSOR FOR MEASURING THE POWER OF THE BEAM OF ULTRAVIOLET LIGHT (SHORT - RADIOMETER), AS WELL AS SENSORS THAT MEASURE THE HEIGHT OF EACH PRINTED LAYER, TO ACHIEVE THE MAXIMUM RESULT.
How to heat the polymer and to what temperature? [03]
THANKS TO THE BUILT-IN FAN WITH HEATER, IT IS NO LONGER NEED TO HEAT THE POLYMER SEPARATELY IN THIRD-PARTY DEVICES. THE PRINTER WILL HEAT THE POLYMER ITSELF TO THE REQUIRED TEMPERATURE.
EACH POLYMER ALREADY IS DESIGNATED FOR THE TEMPERATURE AT WHICH PRINTING STARTS, YOU DO NOT NEED TO MEMORIZE ALL THESE NUMBERS.
How much power do you need a computer to work with Asiga? [04]
A POWERFUL COMPUTER IS NOT NEEDED AS THE PROGRAM IS OPTIMIZED FOR ALL COMPUTERS. DESIRED - INSTALLED WINDOWS 7 OR HIGHER.
How toxic are Asiga polymers? [05]
POLYMERS ARE ABSOLUTELY NON-TOXIC AND EVEN SOME OF THEM CAN BE USED FOR SURGICAL TEMPLATES, TEMPORARY RESTORATIONS AND CAP.
How often should Asiga be calibrated? [06]
THE PLATFORM FOR PRINTING IS CALIBRATED WHEN THE PRINTER IS FIRST OPENED, AND THEN ONLY WHEN NEEDED.
How can I connect an Asiga printer to the network? [07]
ASIGA PRINTER CAN BE CONNECTED BOTH VIA WI-FI AND LAN CABLE.
How to clean the printed model from polymer residues? [08]
FOR THIS YOU CAN USE OR AUTOMATIC WASHINGS USING ALCOHOL, OR ULTRASONIC BATHTUBS, ALSO USING ALCOHOL.
What's the specification? [01]
What makes Asiga the most accurate printer? [02]
THANKS TO THE SENSOR FOR MEASURING THE POWER OF THE BEAM OF ULTRAVIOLET LIGHT (SHORT - RADIOMETER), AS WELL AS SENSORS THAT MEASURE THE HEIGHT OF EACH PRINTED LAYER, TO ACHIEVE THE MAXIMUM RESULT.
How to heat the polymer and to what temperature? [03]
THANKS TO THE BUILT-IN FAN WITH HEATER, IT IS NO LONGER NEED TO HEAT THE POLYMER SEPARATELY IN THIRD-PARTY DEVICES. THE PRINTER WILL HEAT THE POLYMER ITSELF TO THE REQUIRED TEMPERATURE.
EACH POLYMER ALREADY IS DESIGNATED FOR THE TEMPERATURE AT WHICH PRINTING STARTS, YOU DO NOT NEED TO MEMORIZE ALL THESE NUMBERS.
How much power do you need a computer to work with Asiga? [04]
A POWERFUL COMPUTER IS NOT NEEDED AS THE PROGRAM IS OPTIMIZED FOR ALL COMPUTERS. DESIRED - INSTALLED WINDOWS 7 OR HIGHER.
How toxic are Asiga polymers? [05]
POLYMERS ARE ABSOLUTELY NON-TOXIC AND EVEN SOME OF THEM CAN BE USED FOR SURGICAL TEMPLATES, TEMPORARY RESTORATIONS AND CAP.
How often should Asiga be calibrated? [06]
THE PLATFORM FOR PRINTING IS CALIBRATED WHEN THE PRINTER IS FIRST OPENED, AND THEN ONLY WHEN NEEDED.
How can I connect an Asiga printer to the network? [07]
ASIGA PRINTER CAN BE CONNECTED BOTH VIA WI-FI AND LAN CABLE.
How to clean the printed model from polymer residues? [08]
FOR THIS YOU CAN USE OR AUTOMATIC WASHINGS USING ALCOHOL, OR ULTRASONIC BATHTUBS, ALSO USING ALCOHOL.
WHAT'S THE SPECIFICATION? [01]
WHAT MAKES ASIGA THE MOST ACCURATE PRINTER? [02]
THANKS TO THE SENSOR FOR MEASURING THE POWER OF THE BEAM OF ULTRAVIOLET LIGHT (SHORT - RADIOMETER), AS WELL AS SENSORS THAT MEASURE THE HEIGHT OF EACH PRINTED LAYER, TO ACHIEVE THE MAXIMUM RESULT.
HOW TO HEAT THE POLYMER AND TO WHAT TEMPERATURE? [03]
THANKS TO THE BUILT-IN FAN WITH HEATER, IT IS NO LONGER NEED TO HEAT THE POLYMER SEPARATELY IN THIRD-PARTY DEVICES. THE PRINTER WILL HEAT THE POLYMER ITSELF TO THE REQUIRED TEMPERATURE.
EACH POLYMER ALREADY IS DESIGNATED FOR THE TEMPERATURE AT WHICH PRINTING STARTS, YOU DO NOT NEED TO MEMORIZE ALL THESE NUMBERS.
HOW MUCH POWER DO YOU NEED A COMPUTER TO WORK WITH ASIGA? [04]
A POWERFUL COMPUTER IS NOT NEEDED AS THE PROGRAM IS OPTIMIZED FOR ALL COMPUTERS. DESIRED - INSTALLED WINDOWS 7 OR HIGHER.
HOW TOXIC ARE ASIGA POLYMERS? [05]
POLYMERS ARE ABSOLUTELY NON-TOXIC AND EVEN SOME OF THEM CAN BE USED FOR SURGICAL TEMPLATES, TEMPORARY RESTORATIONS AND CAP.
HOW OFTEN SHOULD ASIGA BE CALIBRATED? [06]
THE PLATFORM FOR PRINTING IS CALIBRATED WHEN THE PRINTER IS FIRST OPENED, AND THEN ONLY WHEN NEEDED.
HOW CAN I CONNECT AN ASIGA PRINTER TO THE NETWORK? [07]
ASIGA PRINTER CAN BE CONNECTED BOTH VIA WI-FI AND LAN CABLE.
How to clean the printed model from polymer residues? [08]
FOR THIS YOU CAN USE OR AUTOMATIC WASHINGS USING ALCOHOL, OR ULTRASONIC BATHTUBS, ALSO USING ALCOHOL.
Do you have any questions?
Price — $11 600

In addition to the printer, you get:
1. 1 liter of polymer (enough for 50 models);
2. Reservoir for printing;
3. Lamp for illumination;
4. ASIGA starter kit;
5. Connecting and setting;
6. Training and support;
7. Post-warranty service.
Kyiv, Predslavynska st., 39, office 116
Metro Palace "Ukraine"

Opening hours — 10:00 - 18:00
Contact us
+38 (067)-539-46-50